CVB Status
August 21, 2009 - LMM and two CVB modules are packed for launch
in the MPLM for STS-128/17A presently scheduled for August 25, 2009. Four
additional CVB science modules are manifested (Below the line) on ULF-3
(11/2009).
Overview
The use of interfacial free energy gradients to control
fluid flow naturally leads to simpler and lighter heat transfer systems
because of the absence of mechanical pumps. Therefore, “passive” engineering
systems based on this principle are ideal candidates for the space
program. In this context, “passive” refers to the natural
pressure field for fluid flow due to changes in the intermolecular
force field under an imposed nonisothermal temperature field. This
force field is a function of the shape, temperature, and composition
of the system. For example, heat pipes which rely on these forces
have been proposed frequently to optimize heat transfer under microgravity
conditions. However, the basic thermophysical principles controlling
these systems are not well understood and, as a result, they have
under performed. In general, the full potential of interfacial forces
has not been realized in transport phenomena.

Therefore, the basic experimental and
theoretical studies of the constrained vapor bubble (CVB) under microgravity
conditions to help remedy this undesirable situation. The proposed
use of a transparent glass cell and related optical measurements will
increase the understanding of transport systems controlled by interfacial
phenomena because the system is viewed directly. Relatively large
systems with high heat fluxes and small capillary pressure levels
set in the condenser will be emphasized.
In particular, we are concerned with
the experimental study of the CVB for a completely wetting system,
the liquid will coat all the walls of the chamber. Since in
microgravity the bubble will tend to travel in the middle of the constraining “pipe”.
The first CVB flight unit is presently
under construction (March 2007). Five flight units will be launched
with LMM on ULF 1. With the following samples:
- Pentane Cell 1: bubble length of 20
mm ±5% at 20°C
- Pentane Cell 2: bubble length of 30
mm ±5% at 20°C
- Pentane Cell 3: bubble length of 40
mm ±5% at 20°C
- Ethanol Cell 4: bubble length
of 25 mm ±5% at 20°C
- Dry cell: evacuated to 5 torr
|